Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Leica Biosystems Power Cord NEMA 5-20 to IEC C19 for Leica instruments
Power cord for Leica instruments with a NEMA 5-20 (USA/Japan) plug and an IEC 60320 C19 connector. Supplied as an accessory or replacement cable to connect compatible instruments to a NEMA 5-20 mains outlet.
- NEMA 5-20 plug for 125 V, 20 A mains outlets.
- IEC 60320 C19 connector for compatible instrument inlets.
- Suitable as an accessory or replacement power cable for laboratory instruments.
- Designed for mains power delivery to higher-current equipment.
Andwin Scientific MOTIC QUARTZ HALGN LAMP 6V 30W
The Quartz Halogen Lamp is an accessory for the Digital Compound Microscopes by Motic Instruments. The lamp has an electrical voltage of 6 volts or 30 watts.
Electron Microscopy Sciences Gilder Thin Bar Square 300 mesh Gold Grid
Thin Bar Grids have been developed using a new technology to produce ultra-fine grids with thinner cross bars than regular grids. The result is equally firm specimen support but with 40% more open area for viewing maximum specimen surface area. 3.05 diameter, 0.8 mil thickness.
Grid: Gold
Pitch: 83 µm
Hole: 73 µm
Bar: 10 µm
:
Electron Microscopy Sciences Coates & Welter SEM Mount 3/4" Head, 3/8 " Pin diameter, Aluminum
Coates & Welter aluminum specimen mounts for scanning electron microscopes.
Head: 3/4"
Pin diameter: 3/8"
Electron Microscopy Sciences Cambridge Universal SEM Stub Interchangeable Carousel
Universal adapter to fit Cambridge SEMs which then accepts interchangeable multi carousel, single pin stubs, or re-entrant stubs. Holds 8 pin stubs.
Ibidi USA Specialty Lid for Differential interference contrast (DIC) microscopy, 15 count
Special lid for use in Differential interference contrast (DIC) microscopy. Suitable for use with all ibidi µ-Slide (except channel and PH+ versions). Made from special low birefringence polymer. Pcs./Box: 15 (individually packed)
Electron Microscopy Sciences AMD-FH Microscope Workstation, 90 x 75 cm, Ferromagnetic SS Surface
These isolation tables support most of the larger microscopes and their support equipment. The air isolation platform effectively removes most removes most vibrations. The rigid frame has levelling feet which ensure the table is in excellent contact with the floor. The damped rolling diaphragm isolators have a low natural frequency of 2Hz which effectively isolates out vibrations above 6Hz, well below the frequencies at which typical building vibrations begin to occur. Full Active table with self-levelling and platform guards.
Size: 90 x 75 cm
Surface: Ferromagnetic SS
Type: Active Air Self Leveling
Electron Microscopy Sciences Press-To-Seal Clear Silicone Sheet, 0.25 mm thick
Isolate specimens using press-to-seal silicone isolators with removable hydrophobic barriers. Silicone isolators allow researchers to isolate specimens using removable hydrophobic barriers. They may be used to isolate cells grown in culture dishes or separate multiple specimens affixed to microscope slides. Two Sides Adhesive.
Thickness: 0.25 mm
Electron Microscopy Sciences PS16 Micrometer Standard with UKAS Cert
These stage micrometers are available with a calibration certificate that provides traceability for the precise calibration and confirmation of accuracy of optical measuring instruments, necessary under ISO provisions. The glass discs are mounted in stainless steel slides with engraved serial numbers. Each slide is supplied in a polished wooden storage case. A UKAS accredited laboratory carries out measurements at selected points on the scales and grids and issues a calibration certificate.
Electron Microscopy Sciences Veco Hexagonal with Handle 200 mesh Copper Grid
Veco Grids offer superior handling characteristics. Plus, with a 0.8 mil thickness, Veco Grids are the most rigid grids available. 3.05 mm diameter and 0.8 mil thickness.
Grid: Copper
Pitch: 125 µm
Hole: 85 µm
Bar: 40 µm